cleanup

1 files changed, 0 insertions, 167 deletions

diff --git a/printer.cfg b/printer.cfg
deleted file mode 100644
index 11ae0e4..0000000
--- a/printer.cfg
+++ /dev/null
@@ -1,167 +0,0 @@
-# Klipper printer configuration
-
-[stepper_x]
-step_pin: PD7
-dir_pin: PC5
-enable_pin: !PD6
-step_distance: .01
-endstop_pin: ^!PC2
-position_endstop: -12
-position_max: 215
-position_min: -12
-homing_speed: 50
-
-[stepper_y]
-step_pin: PC6
-dir_pin: PC7
-enable_pin: !PD6
-step_distance: .01
-endstop_pin: ^!PC3
-position_endstop: -8
-position_min: -8
-position_max: 220
-homing_speed: 50
-
-[stepper_z]
-step_pin: PB3
-dir_pin: !PB2
-enable_pin: !PA5
-step_distance: .0025
-endstop_pin: probe:z_virtual_endstop
-position_max: 200
-homing_speed: 20
-
-[extruder]
-step_pin: PB1
-dir_pin: PB0
-enable_pin: !PD6
-step_distance: .0105
-nozzle_diameter: 0.400
-filament_diameter: 1.750
-heater_pin: PD5
-sensor_type: ATC Semitec 104GT-2
-sensor_pin: PA7
-control: pid
-pid_Kp: 25.81
-pid_Ki: 1.97
-pid_Kd: 84.57
-min_temp: 0
-max_temp: 275
-pressure_advance: 0.425 #0.475
-
-# [heater_bed]
-# heater_pin: PD4
-# sensor_type: ATC Semitec 104GT-2
-# sensor_pin: PA6
-# control: watermark
-# min_temp: 0
-# max_temp: 130
-
-[fan]
-pin: PB4
-
-[mcu]
-serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 
-
-[printer]
-kinematics: cartesian
-max_velocity: 300
-max_accel: 1000
-max_z_velocity: 20
-max_z_accel: 100
-
-[display]
-lcd_type: hd44780
-rs_pin: PA3
-e_pin: PA2
-d4_pin: PD2
-d5_pin: PD3
-d6_pin: PC0
-d7_pin: PC1
-up_pin: PA1
-analog_range_up_pin: 9000, 13000
-down_pin: PA1
-analog_range_down_pin: 800, 1300
-click_pin: PA1
-analog_range_click_pin: 2000, 2500
-back_pin: PA1
-analog_range_back_pin: 4500, 5000
-#kill_pin: PA1
-#analog_range_kill_pin: 400, 600
-
-[bltouch]
-sensor_pin: ^PC4
-control_pin: PA4
-x_offset: 30
-y_offset: 0
-z_offset: 0.98 #0.87
-speed: 4
-samples: 2
-pin_move_time: 0.8
-pin_up_reports_not_triggered: true
-pin_up_touch_mode_reports_triggered: false
-
-[bed_mesh]
-speed: 50
-horizontal_move_z: 5
-mesh_min: 20,5
-mesh_max: 200,210
-probe_count: 3,3
-fade_start: 1.0
-fade_end: 0.0
-split_delta_z: .025
-move_check_distance: 7.0
-mesh_pps: 2,2
-algorithm: lagrange
-bicubic_tension: .2
-
-[force_move]
-enable_force_move: True
-
-[homing_override]
-gcode:
-    G90 ; Use absolute position mode
-    G1 Z15
-    G28 X Y
-    G0 X108 Y108 F6000 ; Centre of bed
-    G28 Z
-set_position_z: 0.0
-
-[screws_tilt_adjust]
-screw1: -10,5
-screw1_name: front left screw
-screw2: 170,5
-screw2_name: front right screw
-screw3: 170,210
-screw3_name: rear right screw
-screw4: -10,210
-screw4_name: rear left screw
-horizontal_move_z: 5.
-speed: 50.
-screw_thread: CW-M3
-
-[virtual_sdcard]
-path: ~/.octoprint/uploads
-
-[idle_timeout]
-gcode:
-    TURN_OFF_HEATERS
-timeout: 600
-
-# [pause_resume]
-
-# [gcode_macro M600]
-# default_parameter_X: -10
-# default_parameter_Y: 5
-# default_parameter_Z: 100
-# gcode:
-#     SAVE_GCODE_STATE NAME=M600_state
-#     PAUSE
-#     G91
-#     G1 E-.8 F2700
-#     G1 Z{Z}
-#     G90
-#     G1 X{X} Y{Y} F3000
-#     G91
-#     G1 E-50 F1000
-#     RESTORE_GCODE_STATE NAME=M600_state