(kicad_pcb
  (version 20240108)
  (generator "ergogen")
  (generator_version "4.2.1")
  (general
    (thickness 1.6)
    (legacy_teardrops no)
  )
  (paper "A3")
  (title_block
    (title "fpkb_v5")
    (date "2026-03-13")
    (rev "v1.0.0")
    (company "Unknown")
  )

  (layers
    (0 "F.Cu" signal)
    (31 "B.Cu" signal)
    (32 "B.Adhes" user "B.Adhesive")
    (33 "F.Adhes" user "F.Adhesive")
    (34 "B.Paste" user)
    (35 "F.Paste" user)
    (36 "B.SilkS" user "B.Silkscreen")
    (37 "F.SilkS" user "F.Silkscreen")
    (38 "B.Mask" user)
    (39 "F.Mask" user)
    (40 "Dwgs.User" user "User.Drawings")
    (41 "Cmts.User" user "User.Comments")
    (42 "Eco1.User" user "User.Eco1")
    (43 "Eco2.User" user "User.Eco2")
    (44 "Edge.Cuts" user)
    (45 "Margin" user)
    (46 "B.CrtYd" user "B.Courtyard")
    (47 "F.CrtYd" user "F.Courtyard")
    (48 "B.Fab" user)
    (49 "F.Fab" user)
  )

  (setup
    (pad_to_mask_clearance 0.05)
    (allow_soldermask_bridges_in_footprints no)
    (pcbplotparams
      (layerselection 0x00010fc_ffffffff)
      (plot_on_all_layers_selection 0x0000000_00000000)
      (disableapertmacros no)
      (usegerberextensions no)
      (usegerberattributes yes)
      (usegerberadvancedattributes yes)
      (creategerberjobfile yes)
      (dashed_line_dash_ratio 12.000000)
      (dashed_line_gap_ratio 3.000000)
      (svgprecision 4)
      (plotframeref no)
      (viasonmask no)
      (mode 1)
      (useauxorigin no)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15.000000)
      (pdf_front_fp_property_popups yes)
      (pdf_back_fp_property_popups yes)
      (dxfpolygonmode yes)
      (dxfimperialunits yes)
      (dxfusepcbnewfont yes)
      (psnegative no)
      (psa4output no)
      (plotreference yes)
      (plotvalue yes)
      (plotfptext yes)
      (plotinvisibletext no)
      (sketchpadsonfab no)
      (subtractmaskfromsilk no)
      (outputformat 1)
      (mirror no)
      (drillshape 1)
      (scaleselection 1)
      (outputdirectory "")
    )
  )

  (net 0 "")
(net 1 "matrix_pinky_bottom")
(net 2 "GND")
(net 3 "matrix_pinky_home")
(net 4 "matrix_pinky_top")
(net 5 "matrix_ring_bottom")
(net 6 "matrix_ring_home")
(net 7 "matrix_ring_top")
(net 8 "matrix_middle_bottom")
(net 9 "matrix_middle_home")
(net 10 "matrix_middle_top")
(net 11 "matrix_index_bottom")
(net 12 "matrix_index_home")
(net 13 "matrix_index_top")
(net 14 "matrix_inner_bottom")
(net 15 "matrix_inner_home")
(net 16 "matrix_inner_top")
(net 17 "thumb_tucky")
(net 18 "thumb_reachy")
(net 19 "RAW")
(net 20 "RST")
(net 21 "VCC")
(net 22 "P21")

  
        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 0 0 10)
          (attr virtual)
          (property "Reference" "s1"
              (at -0.05 -7.5 10)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 10)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 10) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 10) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 1 "matrix_pinky_bottom"))
          (pad "2" thru_hole circle (at 1.8 2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 1 "matrix_pinky_bottom"))
          (pad "2" thru_hole circle (at 1.8 -2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at -2.8651949 -16.2493279 10)
          (attr virtual)
          (property "Reference" "s2"
              (at -0.05 -7.5 10)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 10)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 10) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 10) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 3 "matrix_pinky_home"))
          (pad "2" thru_hole circle (at 1.8 2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 3 "matrix_pinky_home"))
          (pad "2" thru_hole circle (at 1.8 -2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at -5.7303898 -32.4986558 10)
          (attr virtual)
          (property "Reference" "s3"
              (at -0.05 -7.5 10)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 10)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 10) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 10) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 4 "matrix_pinky_top"))
          (pad "2" thru_hole circle (at 1.8 2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 10) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 10) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 4 "matrix_pinky_top"))
          (pad "2" thru_hole circle (at 1.8 -2.4 10) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 10) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 10) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 15.0082724 -13.7043592 5)
          (attr virtual)
          (property "Reference" "s4"
              (at -0.05 -7.5 5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 5 "matrix_ring_bottom"))
          (pad "2" thru_hole circle (at 1.8 2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 5 "matrix_ring_bottom"))
          (pad "2" thru_hole circle (at 1.8 -2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 13.570202599999998 -30.1415717 5)
          (attr virtual)
          (property "Reference" "s5"
              (at -0.05 -7.5 5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 6 "matrix_ring_home"))
          (pad "2" thru_hole circle (at 1.8 2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 6 "matrix_ring_home"))
          (pad "2" thru_hole circle (at 1.8 -2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 12.132132799999997 -46.5787842 5)
          (attr virtual)
          (property "Reference" "s6"
              (at -0.05 -7.5 5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 7 "matrix_ring_top"))
          (pad "2" thru_hole circle (at 1.8 2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 7 "matrix_ring_top"))
          (pad "2" thru_hole circle (at 1.8 -2.4 5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 31.743456 -19.3092549 0)
          (attr virtual)
          (property "Reference" "s7"
              (at -0.05 -7.5 0)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 0)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 0) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 0) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 8 "matrix_middle_bottom"))
          (pad "2" thru_hole circle (at 1.8 2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 8 "matrix_middle_bottom"))
          (pad "2" thru_hole circle (at 1.8 -2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 31.743456 -35.8092549 0)
          (attr virtual)
          (property "Reference" "s8"
              (at -0.05 -7.5 0)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 0)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 0) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 0) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 9 "matrix_middle_home"))
          (pad "2" thru_hole circle (at 1.8 2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 9 "matrix_middle_home"))
          (pad "2" thru_hole circle (at 1.8 -2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 31.743456 -52.3092549 0)
          (attr virtual)
          (property "Reference" "s9"
              (at -0.05 -7.5 0)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 0)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 0) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 0) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 10 "matrix_middle_top"))
          (pad "2" thru_hole circle (at 1.8 2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 0) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 0) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 10 "matrix_middle_top"))
          (pad "2" thru_hole circle (at 1.8 -2.4 0) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 0) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 0) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 48.7434559 -15.184254799999998 -5)
          (attr virtual)
          (property "Reference" "s10"
              (at -0.05 -7.5 -5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 -5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 11 "matrix_index_bottom"))
          (pad "2" thru_hole circle (at 1.8 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 11 "matrix_index_bottom"))
          (pad "2" thru_hole circle (at 1.8 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 50.1815257 -31.6214673 -5)
          (attr virtual)
          (property "Reference" "s11"
              (at -0.05 -7.5 -5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 -5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 12 "matrix_index_home"))
          (pad "2" thru_hole circle (at 1.8 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 12 "matrix_index_home"))
          (pad "2" thru_hole circle (at 1.8 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 51.6195955 -48.0586798 -5)
          (attr virtual)
          (property "Reference" "s12"
              (at -0.05 -7.5 -5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 -5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 13 "matrix_index_top"))
          (pad "2" thru_hole circle (at 1.8 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 13 "matrix_index_top"))
          (pad "2" thru_hole circle (at 1.8 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 64.8930545 -10.458742599999997 -5)
          (attr virtual)
          (property "Reference" "s13"
              (at -0.05 -7.5 -5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 -5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 14 "matrix_inner_bottom"))
          (pad "2" thru_hole circle (at 1.8 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 14 "matrix_inner_bottom"))
          (pad "2" thru_hole circle (at 1.8 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 66.3311243 -26.8959551 -5)
          (attr virtual)
          (property "Reference" "s14"
              (at -0.05 -7.5 -5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 -5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 15 "matrix_inner_home"))
          (pad "2" thru_hole circle (at 1.8 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 15 "matrix_inner_home"))
          (pad "2" thru_hole circle (at 1.8 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 67.76919409999999 -43.333167599999996 -5)
          (attr virtual)
          (property "Reference" "s15"
              (at -0.05 -7.5 -5)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 -5)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 -5) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 16 "matrix_inner_top"))
          (pad "2" thru_hole circle (at 1.8 2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 -5) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 16 "matrix_inner_top"))
          (pad "2" thru_hole circle (at 1.8 -2.4 -5) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -5) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 -5) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 62.73594990000001 14.197076200000001 -15)
          (attr virtual)
          (property "Reference" "s16"
              (at -0.05 -7.5 -15)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 -15)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 -15) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 -15) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 -15) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 -15) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 -15) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 17 "thumb_tucky"))
          (pad "2" thru_hole circle (at 1.8 2.4 -15) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -15) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -15) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -15) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -15) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 -15) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 -15) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 -15) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 17 "thumb_tucky"))
          (pad "2" thru_hole circle (at 1.8 -2.4 -15) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -15) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -15) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -15) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -15) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 -15) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 -15) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 -15) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 -15) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        (footprint "ULP_HANDSOLDER" (version 20260313) (generator pcbnew)
          (layer "F.Cu")
          (at 79.83929040000001 21.281511800000004 -30)
          (attr virtual)
          (property "Reference" "s17"
              (at -0.05 -7.5 -30)
              (unlocked yes)
              (layer "F.SilkS")
              hide
              (effects (font (size 1 1) (thickness 0.15)))
          )
          (property "Value" "ULP_SW"
              (at 0 0 -30)
              (unlocked yes)
              (layer "F.Fab")
              (hide yes)
              (effects (font (size 1 1) (thickness 0.15)))
          )
          
        (fp_poly
         (pts
          (xy -7.1 -6.4) (xy 7.1 -6.4) (xy 7.1 6.4) (xy -7.1 6.4)
         )
         (stroke (width 0.1) (type solid))
         (fill no)
         (layer "F.SilkS")
        )
        
          (fp_poly
            (pts
              (xy -6.8 -6.1) (xy 6.8 -6.1) (xy 6.8 6.1) (xy -6.8 6.1)
            )
            (stroke (width 0.1) (type solid))
            (fill no)
            (layer "F.CrtYd")
          )
          
        (fp_rect (start 8 8) (end -8 -8)
         (stroke (width 0.15) (type solid))
         (fill no)
         (layer "Dwgs.User")
        )
        
          (fp_line (start -2.4 4.5) (end -2.4 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 2.4) (end 2.6 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 5.5) (end -1.4 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 3.4) (end 3.6 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 3.4) (mid -2.107107 2.692893) (end -1.4 2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 5.5) (mid -2.107107 5.207107) (end -2.4 4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 2.4) (mid 3.307107 2.692893) (end 3.6 3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 4.5) (mid 3.307108 5.207107) (end 2.6 5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 1.2 -30) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 2.75 -30) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 -3.0 -30) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole oval (at 5.825 3.0 -30) (size 1.3 1.85) (drill oval 1.3 1.85) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 2.4 -30) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 18 "thumb_reachy"))
          (pad "2" thru_hole circle (at 1.8 2.4 -30) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -30) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -30) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -30) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -30) (size 2.5 2.0) (layers "F.Cu" "F.Mask") (net 2 "GND"))
      
          (fp_line (start -2.4 -4.5) (end -2.4 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start -1.4 -2.4) (end 2.6 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 2.6 -5.5) (end -1.4 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_line (start 3.6 -3.4) (end 3.6 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -2.4 -3.4) (mid -2.107107 -2.692893) (end -1.4 -2.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start -1.4 -5.5) (mid -2.107107 -5.207107) (end -2.4 -4.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 2.6 -2.4) (mid 3.307107 -2.692893) (end 3.6 -3.4)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (fp_arc (start 3.6 -4.5) (mid 3.307108 -5.207107) (end 2.6 -5.5)
            (stroke (width 0.05) (type default))
            (layer "Edge.Cuts")
          )
          (pad "" np_thru_hole circle (at -5.8 -1.2 -30) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "" np_thru_hole circle (at -5.8 -2.75 -30) (size 1.05 1.05) (drill 1.05) (layers "*.Cu" "*.Mask"))
          (pad "1" thru_hole circle (at -0.5 -2.4 -30) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 18 "thumb_reachy"))
          (pad "2" thru_hole circle (at 1.8 -2.4 -30) (size 1.5 1.5) (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net 2 "GND"))
          (pad "3" smd rect (at -5.9 5.4 -30) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at -5.9 -5.4 -30) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 5.4 -30) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "3" smd rect (at 5.9 -5.4 -30) (size 2.5 2.0) (layers "B.Cu" "B.Mask") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 -5.4 -30) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at -5.9 5.4 -30) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 -5.4 -30) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
          (pad "" thru_hole circle (at 5.9 5.4 -30) (size 1.05 1.05) (drill 0.6) (layers "*.Cu") (net 2 "GND"))
        
          (model PG1316S.step
            (offset (xyz -4.75 -6.25 -10.25))
            (scale (xyz 1 1 1))
            (rotate (xyz 0 0 0))
          )
        
        )
      

        
      (module ProMicro (layer F.Cu) (tedit 5B307E4C)
      (at 84.894508 -32.549563299999996 -95)

      
      (fp_text reference "MCU1" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
      (fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
    
      
      (fp_line (start -19.304 -3.81) (end -14.224 -3.81) (layer Dwgs.User) (width 0.15))
      (fp_line (start -19.304 3.81) (end -19.304 -3.81) (layer Dwgs.User) (width 0.15))
      (fp_line (start -14.224 3.81) (end -19.304 3.81) (layer Dwgs.User) (width 0.15))
      (fp_line (start -14.224 -3.81) (end -14.224 3.81) (layer Dwgs.User) (width 0.15))
    
      
      (fp_line (start -17.78 8.89) (end 15.24 8.89) (layer F.SilkS) (width 0.15))
      (fp_line (start 15.24 8.89) (end 15.24 -8.89) (layer F.SilkS) (width 0.15))
      (fp_line (start 15.24 -8.89) (end -17.78 -8.89) (layer F.SilkS) (width 0.15))
      (fp_line (start -17.78 -8.89) (end -17.78 8.89) (layer F.SilkS) (width 0.15))
      
        
        
        (fp_line (start -15.24 6.35) (end -12.7 6.35) (layer F.SilkS) (width 0.15))
        (fp_line (start -15.24 6.35) (end -15.24 8.89) (layer F.SilkS) (width 0.15))
        (fp_line (start -12.7 6.35) (end -12.7 8.89) (layer F.SilkS) (width 0.15))
      
        
        (fp_text user RAW (at -13.97 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user GND (at -11.43 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user RST (at -8.89 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user VCC (at -6.35 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P21 (at -3.81 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P20 (at -1.27 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P19 (at 1.27 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P18 (at 3.81 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P15 (at 6.35 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P14 (at 8.89 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P16 (at 11.43 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P10 (at 13.97 4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
      
        (fp_text user P01 (at -13.97 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P00 (at -11.43 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user GND (at -8.89 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user GND (at -6.35 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P02 (at -3.81 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P03 (at -1.27 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P04 (at 1.27 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P05 (at 3.81 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P06 (at 6.35 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P07 (at 8.89 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P08 (at 11.43 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
        (fp_text user P09 (at 13.97 -4.8 -5) (layer F.SilkS) (effects (font (size 0.8 0.8) (thickness 0.15))))
      
        
        (pad 1 thru_hole rect (at -13.97 7.62 -95) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 19 "RAW"))
        (pad 2 thru_hole circle (at -11.43 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 2 "GND"))
        (pad 3 thru_hole circle (at -8.89 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 20 "RST"))
        (pad 4 thru_hole circle (at -6.35 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 21 "VCC"))
        (pad 5 thru_hole circle (at -3.81 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 22 "P21"))
        (pad 6 thru_hole circle (at -1.27 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 16 "matrix_inner_top"))
        (pad 7 thru_hole circle (at 1.27 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 13 "matrix_index_top"))
        (pad 8 thru_hole circle (at 3.81 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 10 "matrix_middle_top"))
        (pad 9 thru_hole circle (at 6.35 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 7 "matrix_ring_top"))
        (pad 10 thru_hole circle (at 8.89 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 4 "matrix_pinky_top"))
        (pad 11 thru_hole circle (at 11.43 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 15 "matrix_inner_home"))
        (pad 12 thru_hole circle (at 13.97 7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 12 "matrix_index_home"))
        
        (pad 13 thru_hole circle (at -13.97 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 9 "matrix_middle_home"))
        (pad 14 thru_hole circle (at -11.43 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 6 "matrix_ring_home"))
        (pad 15 thru_hole circle (at -8.89 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 2 "GND"))
        (pad 16 thru_hole circle (at -6.35 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 2 "GND"))
        (pad 17 thru_hole circle (at -3.81 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 3 "matrix_pinky_home"))
        (pad 18 thru_hole circle (at -1.27 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 1 "matrix_pinky_bottom"))
        (pad 19 thru_hole circle (at 1.27 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 5 "matrix_ring_bottom"))
        (pad 20 thru_hole circle (at 3.81 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 8 "matrix_middle_bottom"))
        (pad 21 thru_hole circle (at 6.35 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 11 "matrix_index_bottom"))
        (pad 22 thru_hole circle (at 8.89 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 14 "matrix_inner_bottom"))
        (pad 23 thru_hole circle (at 11.43 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 17 "thumb_tucky"))
        (pad 24 thru_hole circle (at 13.97 -7.62 0) (size 1.7526 1.7526) (drill 1.0922) (layers *.Cu *.SilkS *.Mask) (net 18 "thumb_reachy"))
      )
        

        
      (module TRRS-PJ-320A-dual (layer F.Cu) (tedit 5970F8E5)

      (at 92.10603640000001 -3.1090069999999974 -95)   

      
      (fp_text reference "TRRS1" (at 0 14.2) (layer Dwgs.User) (effects (font (size 1 1) (thickness 0.15))))
      (fp_text value TRRS-PJ-320A-dual (at 0 -5.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))))

      
      (fp_line (start 0.5 -2) (end -5.1 -2) (layer Dwgs.User) (width 0.15))
      (fp_line (start -5.1 0) (end -5.1 -2) (layer Dwgs.User) (width 0.15))
      (fp_line (start 0.5 0) (end 0.5 -2) (layer Dwgs.User) (width 0.15))
      (fp_line (start -5.35 0) (end -5.35 12.1) (layer Dwgs.User) (width 0.15))
      (fp_line (start 0.75 0) (end 0.75 12.1) (layer Dwgs.User) (width 0.15))
      (fp_line (start 0.75 12.1) (end -5.35 12.1) (layer Dwgs.User) (width 0.15))
      (fp_line (start 0.75 0) (end -5.35 0) (layer Dwgs.User) (width 0.15))

      
        
        (pad "" np_thru_hole circle (at -2.3 8.6) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask))
        (pad "" np_thru_hole circle (at -2.3 1.6) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask))
      
        
        (pad 1 thru_hole oval (at 0 11.3 -95) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask) (net 2 "GND"))
        (pad 2 thru_hole oval (at -4.6 10.2 -95) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask) (net 2 "GND"))
        (pad 3 thru_hole oval (at -4.6 6.2 -95) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask) (net 22 "P21"))
        (pad 4 thru_hole oval (at -4.6 3.2 -95) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask) (net 21 "VCC"))
      
        
        (pad 1 thru_hole oval (at -4.6 11.3 -95) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask) (net 2 "GND"))
        (pad 2 thru_hole oval (at 0 10.2 -95) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask) (net 2 "GND"))
        (pad 3 thru_hole oval (at 0 6.2 -95) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask) (net 22 "P21"))
        (pad 4 thru_hole oval (at 0 3.2 -95) (size 1.6 2.2) (drill oval 0.9 1.5) (layers *.Cu *.Mask) (net 21 "VCC"))
      )
      
  (gr_line (start 8.900157327548278 -2.793326387379757) (end 10.54206920560516 6.518418285014988) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start -6.518418282977468 10.54206921099514) (end 9.73090960560516 7.676874285014987) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start -16.27245901199827 -39.017074082501125) (end -7.67687428297747 9.730909610995141) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start -15.461299411998267 -40.17553008250112) (end 2.2179493519351148 -43.29285861426605) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 24.707625031743266 -8.972099200000002) (end 24.942108262837838 -6.2919435532768375) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 9.79780942754828 -3.9631692873797517) (end 24.03306926283784 -5.208593153276844) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 3.107335937846584 -55.07455024795875) (end 21.5806117 -56.69075248747173) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 2.198296937846584 -53.991199847958754) (end 3.040495851935114 -44.36482211426604) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 25.703819731743266 -10.059254899999999) (end 37.91843448252783 -10.059254899999999) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 23.493456 -61.5592549) (end 39.993455999999995 -61.5592549) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 40.993455999999995 -60.5592549) (end 40.993455999999995 -59.190011178200834) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 22.493456 -57.68694718747173) (end 22.493456 -60.5592549) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 39.718659037028445 -6.688488751748437) (end 54.16348210020905 -5.424730456670279) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 38.809620037028445 -7.771839151748452) (end 38.914629182527825 -8.972099200000002) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 41.9063003 -58.19381647820084) (end 60.64439236279136 -56.554445846191726) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 61.55343136279135 -55.471095446191725) (end 61.44012890244618 -54.176042373679024) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 91.81842254063552 0.17843546293579493) (end 93.2564922 -16.258777) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 90.73507214063554 1.087474462935793) (end 82.06020564844698 0.3285220072554358) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 56.265359363536064 -1.9282346430407582) (end 55.86825753725819 -1.9629765543743005) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 54.959218637258196 -3.046326954374422) (end 55.072521100209066 -4.3413800566704595) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 93.25649229999999 -16.258777) (end 94.69456199999999 -32.695989499999996) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 62.3491679024462 -53.092691973679045) (end 95.22359286100641 -50.2165524470186) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 94.69456209999998 -32.695989499999996) (end 96.13263186100647 -49.133202047018585) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 81.00712414844698 1.0658977072554308) (end 78.83674336903394 9.165868998424628) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 52.37298562852625 20.996632947061812) (end 68.05642847780047 25.19899881514382) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 51.665878828526246 19.771888147061816) (end 57.14412936353605 -0.6732209430407181) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 79.3026691690339 10.290713398424714) (end 91.60900000098925 17.39577680369196) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 83.72502539630807 33.05122140098922) (end 91.97502540098925 18.761802203691985) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_line (start 68.29760947780046 25.298899215143816) (end 82.35899999630804 33.41724680098926) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 9.73090960560516 7.676874285014991) (mid 10.376413505605159 7.26564298501499) (end 10.54206920560516 6.518418285014991) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start -7.676874282977469 9.730909610995141) (mid -7.265642982977468 10.37641351099514) (end -6.518418282977469 10.542069210995141) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start -15.461299411998267 -40.175530082501126) (mid -16.106803311998267 -39.76429878250113) (end -16.272459011998265 -39.017074082501125) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 2.2179493519351143 -43.29285861426605) (mid 2.837654551935114 -43.66890491426605) (end 3.0404959519351142 -44.36482211426605) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 3.107335937846584 -55.07455024795875) (mid 2.4284472378465836 -54.72114314795875) (end 2.1982969378465835 -53.991199847958754) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 21.5806117 -56.690752487471734) (mid 22.230733299999997 -57.01135698747173) (end 22.493456 -57.68694718747173) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 23.493456 -61.5592549) (mid 22.786349199999997 -61.2663617) (end 22.493456 -60.5592549) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 40.993455999999995 -60.5592549) (mid 40.70056279999999 -61.2663617) (end 39.993455999999995 -61.5592549) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 40.993455999999995 -59.190011178200834) (mid 41.25617869999999 -58.51442097820083) (end 41.9063003 -58.19381647820084) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 61.55343136279136 -55.47109544619173) (mid 61.32328106279136 -56.20103874619173) (end 60.64439236279136 -56.554445846191726) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 61.44012890244619 -54.17604237367898) (mid 61.67027920244619 -53.44609907367899) (end 62.34916790244619 -53.09269197367899) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 96.13263186100644 -49.13320204701861) (mid 95.90248156100644 -49.8631453470186) (end 95.22359286100644 -50.2165524470186) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 90.73507214063555 1.0874744629357556) (mid 91.46501544063555 0.8573241629357555) (end 91.81842254063555 0.17843546293575557) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 82.06020564844697 0.32852200725543423) (mid 81.39947344844697 0.5055647072554342) (end 81.00712414844698 1.0658977072554343) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 78.83674336903394 9.165868998424644) (mid 78.87878966903394 9.807371398424644) (end 79.30266916903393 10.290713398424645) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 91.97502540098927 18.761802203691964) (mid 92.07492580098926 18.002983203691965) (end 91.60900000098927 17.395776803691962) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 82.35899999630806 33.41724680098925) (mid 83.11781899630806 33.51714720098925) (end 83.72502539630806 33.05122140098925) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 68.29760947780046 25.298899215143816) (mid 68.18029287780047 25.24104511514382) (end 68.05642847780047 25.198998815143817) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 51.66587882852625 19.771888147061812) (mid 51.765779228526256 20.53070714706181) (end 52.37298562852625 20.996632947061812) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 57.14412936353606 -0.6732209430407349) (mid 56.99735556353606 -1.5056163430407348) (end 56.26535936353606 -1.9282346430407349) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 54.95921863725818 -3.0463269543743015) (mid 55.18936893725818 -2.3163836543743015) (end 55.86825753725818 -1.9629765543743016) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 55.07252110020906 -4.341380056670385) (mid 54.84237080020906 -5.071323356670385) (end 54.16348210020906 -5.424730456670385) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 38.80962003702844 -7.7718391517484395) (mid 39.039770337028436 -7.041895851748439) (end 39.71865903702844 -6.688488751748439) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 38.914629182527825 -8.972099199999985) (mid 38.65571178252783 -9.734845099999985) (end 37.91843448252783 -10.059254899999985) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 25.703819731743266 -10.059254899999999) (mid 24.966542431743267 -9.7348451) (end 24.707625031743266 -8.972099199999999) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 24.033069262837838 -5.208593153276855) (mid 24.711957962837836 -5.562000253276855) (end 24.942108262837838 -6.291943553276855) (layer Edge.Cuts) (stroke (width 0.15) (type default)))
(gr_arc (start 9.79780942754828 -3.963169287379751) (mid 9.091611827548281 -3.575735987379751) (end 8.900157427548281 -2.793326387379751) (layer Edge.Cuts) (stroke (width 0.15) (type default)))

)